ULV Fogger

Product Description

Typical Uses of Fogging Machine Includes:

• Humidification (Fogging Water).
• Odour Control (Fogging odour Neutralizers, Scents or Masking chemicals).
• Applications Of Insecticides.
• Application Of Germicides or Sanitizing Chemicals For Cleaning & Sanitation Purposes.
• Control Of mold and mildew ( Applying Sporicides, Fungicides or anti-mildew Chemicals )

How to use:

• Add chemical solution to the liquid tank.
• Plug the fogger power cord into a grounded power outlet.
• Using the dosage instructions provided by the chemical manufacturer, calculate the time required to properly fog the area.
• Adjust the angle of the fogger power head for the space you are treating (point the nozzle slightly up for max distance)
• Aim the fog output towards area requiring treatment. For space fogging select the direction of greatest clearance so fog droplets can fill the space (droplets that hit something will condense).
• Turn on the fogger.

Note: When Carrying fogger by hand move it gently and slowly in a smooth arc. Sudden movements can impose excessive torque on rapidly spinning fan blades and could cause premature blade failure.

Cleaning The Fogger:

• Normal Cleanup: When Fogging is complete, remove the suction tube from the liquid source and operate the fogger for one minute with valve full open. This will expel any liquid remaining in the fogger's internal lines. Transfer excess chemical from tank to an appropriate container.
• Cleanup of Difficult Liquids: After fogging a viscous liquid, emulsion or a solid suspension, begin with a normal cleanup (Step A). Then put suction tube into an appropriate solvent for your fogging chemical (water for water-dispersible liquid, kerosene for oil based liquids) and operate for 1-2 minutes flushing residual chemicals with clean solvents. Then again repeat Step A.
• Cleanup for Long Term Storage: Remove all the liquid from the tank to eliminate the potential for long term chemical attack on tank, suction tube or tubing. Then follow Step A or B.